0 comments / Posted on by OMO Bikes


Clean Bike is a Happy Bike and most of the riders are ignored this point, you just need a Colin and microfiber towel to secure your bike from dirt and dust but what you do when your bike is poured with full of mud.

So, in this blog, we share some few tips and tricks to make the cleaning process less of a hassle.

WHAT YOU NEED:

You’ll need these every day, household items to clean your bike:

  1. Clean shop rags or old cotton T-shirts (free jugaad)
  2. Bottle brushes
  3. Scrub brushes
  4. Bucket
  5. Soft, square-head brush for wheels
  6. Garden hose with trigger-style spray head
  7. Sponges.

DO’S AND DON'T’S

DO
• Recycle your dish sponges. You’ll get another couple of months out of them on bike-wash duty.
• Floss with a clean rag between chain rings, cogs, and other hard-to-reach places.
• Be committed. A clean bike rides better and lasts longer.

DON’T
• Mix your buckets, tools, and rags. You don’t want to cover your frame with drivetrain grease.
• Use an abrasive sponge or brush on your frame.
• Blast your bike with a high-pressure hose. Water will get into and degrade your bearings.

THE SETUP

 how to clean a bike

Step 1:

Fill two clean buckets with water and a generous squirt of dish soap. Lay out your brushes, sponges, and rags.

Step 2:
Place your bike in a work stand, this brings it up off the ground and makes all the nooks and crannies easier to reach. No work stands? Try hooking the nose of your saddle over a taut clothesline.

Step 3:
Next, remove your wheels. You can insert a chain keeper—a guide for your chain when the cassette is removed—to keep tension on the drivetrain. It’s fine to skip this step if you don’t want to spring for the tool, but using one prevents the chain from folding up on itself or falling off the bike when you try to work on it. Trust us, it’s annoying.



THE WASH

how to clean a bike

 





0 comments

Leave a comment

All blog comments are checked prior to publishing